Contact us to Join




Quality Sheet-Fed & Metal Printing Blanket

  • Descriptions
    The MAXMA blanket MS6200 has been designed for metal presses. Thanks to its closed cells compressible layer made of an exclusive rubber compound, it distinguishes itself through its excellent shock absorption characteristics, giving you outstanding register accuracy, minimized streaking and reduced gauge loss. 

    Its micro-buffed, solvent-resistant surface allows for an excellent ink transfer that produces both precise halftones and full solids, resulting in outstanding contrasts.

    • Closed cell technology
    • Microbuffed, solvent-resistant printing surface
    • Excellent ink transfer
    • Precise dot reproduction
    • Superior solids
    • Reduced gauge loss
    • Excellent resistance against smashes
    • Outstanding register accuracy
    • Minimized streaking
    • Stable paper feed
    • Superb washability
    • Extended service life
    • It is recommended for conventional inks.
    Not appropriate with UV ink. 

  • Blanket Surface:  
    Color Gray
    Surface Micro-ground; solvent resistant compound
    Surface Roughness 0.9-1.1µm
    Hardness (Shore A) 76-79
    Water & Solvent Protection Yes
    Compressoble Layer Micro-sphere
    Fabric Layers 4 plies
    Elongation ≤0.9% at 500N/5cm
    Nominal Thickeness 1.95mm (standard)/ 1.70mm
    Thickeness Tolerance ±0.02mm
    Application Quality Sheet-Fed & Metal printing

    Before installation, please measure the thickness of printing blanket for adjusting the press accurately; While installation, please use the constant wrench to tighten gradually; After installation, please clean the rubber surface and ready for print; During work time, please often use special solvent to clean the rubber surface for extend the useful time.