Uplux 405 CTcP placa
The MAXMA UPLUX 405 CTcP Plate is a specially designed CTP plate with a high UV sensitive emulsion coating that makes it suitable for UV CTP plate-setters.
By boosting and broadening the sensitivity of the coating emulsion and by modifying the substrate graining architecture, UPLUX 405 Plate runs fast and excellently on the world’s leading brands UV CTP plate-setters.
High UV sensitive emulsion
Unlike traditional PS plate; our UPLUX 405 has adapted high UV sensitive emulsion. You will be able to have a clear image on the plate.
Outstanding chemicals resistance, durability and wide latitude
Strong chemicals established UPLUX 405’s advantages of high impression and durability. The impression of UPLUX 405’s could go up to 150,000 runs unbaked and 1,000,000 after baked. Consistent quality, solid reliability and wide latitude. UPLUX 405 could be use in a diverse range of printing environments, including sheet-fed and heat-set web / cold-set web offset applications.
Cost effective, previous investment would not go to drain
UPLUX 405 shares similar method of developing PS plate. Therefore, the prepress equipment could still be put to use. The system could still adapt RIP data, standard plate processor and related chemicals. UPLUX 405 is almost half price compare with regular PS plants with films.
- Consistent quality, solid reliability and wide latitude. Positive-working with common parameter settings
- Less required energy - faster and easier imaging
--- Higher sensitivity and lower energy required comes with better productivity. And also prolong the life the laser-head. And also, it won’t matter whether your clients machines are old or new.
- Greater resistance to chemicals and scratches
--- Especially to alkaline and alcohol, to protect the plates from chemical
- Even electrochemical-grained substrate
--- Excellent coating and base flatness, which can easily to seen with the magnifiers (100-200 times)
- Superb ink-water balance
--- Provide you the image you hope for.
- Convenient daylight handling
- First-class aluminum material
100, 50, 40, or 30 sheets / box standard package.
- Plate type :
Positive-working CTcP plate with optional post-bake for longer runs.
For both sheet-fed and web offset presses.
Electrochemical-grained and anodized aluminum substrate.
- Thickness :
0.15, 0.20, 0.25, 0.30, and 0.40
- Shelf life :
- Safelight :
Handling under UV-free yellow safelight.
- Spectral sensitivity :
360 - 420nm (peak at 405nm)
- Required imaging energy:
50 mj / cm2
- Resolution :
1 - 99% at 250lpi
- FM capability :
Stochastic 10 micron
- Developer :
Maxma DP-4 (recommended) or popular alternatives.
- Developer dilution :
1:3 - 1:4 (1:4 recommended).
- Replenishing rate :
30ml / m2
- Processing temperature :
25 - 27 degrees Celsius
- Processing dwell time :
35 - 25 seconds
- Run length :
150,000 runs (unbaked) and above 1,000,000 runs (baked)
- Plate baking :
220 degrees Celsius for 5 minutes
- Plate type :