Designed as a strong all round performer, our FH6100 blanket combines both excellent print results and long-life performance characteristics.
Its thickness, compressibility and printability have been controlled to a fine degree to ensure the same characteristics each and every time.
- Durable top surface
- Special rubber compound has high resistance to swelling caused by printing agents based in mineral vegetable oils
- Minimum thickness tolerance
- High smash life
- High and precise resilience due to special process
- High ink transfer
- Reduces lining
Before installation, please measure the thickness of printing blanket for adjusting the press accurately;
While installation, please use the constant wrench to tighten gradually;
After installation, please clean the rubber surface and ready for print;
During work time, please often use special solvent to clean the rubber surface for extend the useful time.
Surface: Micro-ground and polished; Solvent resistant compound
Hardness (Shore A): 76 - 79 shore A
Water & Solvent Protection: Yes
Compressible Layer: Compressible using Air Micro-sephere Technology
Fabric Layers: 3 plies
Elongation: ≦1% at 500 N/5cm
Tensile Strength: ≧4000 N/5cm
Surface Roughness: 0.90 – 1.10 μm
Nominal Thickness: 1.95 mm
Thickness Tolerance: +/- 0.02mm
Application: Package printing, thick paper